New overhead cantilever sign structures
Method of making new type overhead cantilever sign structures
There are many single cantilever traffic signs on the highway, but the height and Angle of these single cantilever traffic signs are fixed, but sometimes the direction of the road section is not very positive, and it needs to be adjusted after installation, which is not convenient and the use effect is not ideal.
The purpose of the utility model is to provide a new overhead cantilever sign structures device which is convenient to adjust the height and Angle and has good use effect.
The new overhead cantilever sign structures device consists of:
Marks column 1 and column fixed link at the bottom of the bottom fixed plate 2, the area of the bottom fixed plate is greater than the marks column at the bottom of the area, the bottom fixed plate with bolts 3, the bottom fixed plate and sign the buried at the bottom of the column, mark column set adjustment circle is set of 4, marked by penetrating between column and regulate round set of 5 fixed bolt, adjust the round 6 sets of welding cantilever, the front end of the cantilever open half a synchronized to slot 7, 8, a slot in half a synchronized to insert control the column is to control the column in regulating slots 9, regulating slots open within 21 stem, regulating slots on the upper part of the insert wedge 22, The lower part of the adjusting slot is inserted into the lower adjusting wedge 23.
Between stem and to control the column 24 fixed by screws, and the regulating stem wedge between through screws, and the regulating stem wedge between by screws, to control the column and can adjust the relative position between the stem, the adjustment with adjustment wedge can fill adjustment under the slot wedge, make sure to control the column and vertical bar after adjusting the connection between the fixed more solid, fixed vertical stem connection cantilever cantilever under 10 and 11, cantilever retaining a fixed on fasteners, the cantilever buckle under fixed fasteners, fixed fasteners and fasteners are fixed on the connection traffic sign 12.
A new overhead cantilever sign structures device, the upper fixing fastener comprises an upper arc plate 13, the top and bottom of the upper arc plate are connected with the upper fixing plate 14, between the upper fixing plate and the traffic cantikever sign board is fixed by screw 15, the upper arc plate buckle the upper cantilever and the screw is fixed; The lower fixing fastener comprises a lower arc plate 16, the top and bottom of the lower arc plate are connected with the lower fixing plate 17, the lower fixing plate and traffic signs are fixed by screws, the lower arc plate buckle the lower cantilever, and the screw is fixed.
The new overhead cantilever sign structures device is provided with a through hole 18 at the top and bottom of the slot on the half-mouth shape, and a fixed hole 19 is provided on the adjusting horizontal column. The fixed hole is clamped between the through holes and fixed by the vertical bolt 20, and the adjusting horizontal column rotates around the vertical bolt.
There are traffic signs on the overhead cantilever sign structures. The installation height of cantilever sign bracket can be adjusted according to the need, and the visual Angle is the best after installation.
First the bottom fixed plate with fixed within the concrete foundation, expansion bolt in the bottom fixed plate and cantilever sign the buried at the bottom of the column, will adjust round a condom on the marks column, bolted, adjust to the height of the need to control the column shape and half a mouth with vertical bolt connection between slot together, to fix the cantilever and the cantilever using fasteners and fixed buckle under fixed on the traffic sign, in according to the need to adjust to control the column shape and half mouth slot rotation Angle position, with fastening finally shaft bolt in place.
1. The regulation of new overhead cantilever sign structures round a condom on the marks column, the height of the assembly can be adjusted according to the need for assembly and, after assembled by bolts through adjust the round set and sign pillar are fixed, mark column has a set of vertical arrangement of penetrating holes, in regulating regulation round set position is convenient, after fixed firmly, use safety.
2. After the new overhead cantilever sign structures in the assembly can also regulate traffic signs show Angle according to need, no matter the product will be installed in any position, can ensure traffic sign fully show the driver, display of clear, show no dead Angle, show the effect is good, can improve the watch the clear degree of traffic signs.
3. New overhead cantilever sign structures of cantilever and regulating horizontal column can adjust the Angle, between in regulating cantilever and adjust the Angle between the horizontal column, both to less than 90 °, can also be greater than 90 °, during adjustment is convenient, can ensure traffic sign former Angle Angle, after fully able to meet the needs of the traffic signs when driving a car, use effect is good.
4. The traffic signs of the new overhead cantilever sign support structures are assembled and fixed by the cantilever, the upper fixed fastener, the lower cantilever and the lower fixed fastener to ensure that the fixed traffic signs are firm and stable, and the use is very safe.
BIG TREE are among the leading manufacturers of cantilever sign support structures in the China. Being in the business for two decades, the company offers a wide range of products including bus shelters, outdoor billboards, street furniture, led display billboard, light box,etc. Till now our products have been successfully exported to over 35 countries.